AMT Datasouth Accel 7450 - Manual (Page 23)

ACCEL-7450
- 23 -
Important Note: The DARK FORMS LOAD feature uses the same left
starting position as the last reflective paper load or zero (0) on the cabinet
ruler if the printer was just powered up.
This means at least one (1) reflective (white or light colored) form must
load/eject or be printed before using the DARK FORMS LOAD feature. If
this is not done, the left margin will be off.
13. MICRO RLF (ALT + RLF/MICRO RLF keys)
Pressing this key combination causes paper to reverse
feed 1/360 inch. Use this key to adjust the paper
position.
Holding down these keys produces continuous micro
line feeding.
14. DARK FORMS LOAD (ALT + EJECT LOAD/DARK FORM keys)
Pressing this key combination causes the printer to
load manual feed forms regardless of their color. Use
this special mode if printing starts at the wrong place
due to non-reflective (dark) areas on a form.
Be sure to hold forms firmly in the feed rollers so paper
is grasped immediately as the printer will not
automatically compensate for the starting print position
based on the paper edges.
15. JAM REMOVAL (ALT + ONLINE/JAM REMOVAL keys)
Pressing this key combination allows paper to be easily
removed. Use this special mode if the EJECT key does
not discharge the paper.
To exit JAM REMOVAL mode press the ONLINE key.
ENTER RLF
ALT
+
MICRO RLF
ENTER EJECT/LOAD
ALT
+
DARK FORM
ENTER ONLINE
ALT
+
JAM REMOVAL