AMT Datasouth Accel 7450 - Manual (Page 32)

ACCEL-7450
- 32 -
POWER UP AS
USER 1
USER 2 *
Using “PWR UP AS” Setup Profiles
The printer has a total of 6 setup profiles. They are designated USER 1~6.
Each profile may be modified with its own set (or group) of setup values.
The current profile is selected from the printer’s control panel menu item
“41 PWR UP AS” using the same procedure as described in the menu setting
example.
The printer will use the selected profile whenever it is reset or powered up.
Restoring Factory settings:
Cycle printer power ON + +
USER Settings can be restored to factory default by
performing an INTIALIZATION-1. This special key
function is executed by pressing and holding these keys
while simultaneously turning ON the printer power.
Release keys when LCD display reads
“EEPROM INITIAL 1”.