AMT Datasouth Accel 7450 - Manual (Page 42)

ACCEL-7450
- 42 -

Paper has jamed at tractor. Pull any wrinkled
paper out, reload paper in the tractors then
press the ONLINE key to restart printing.

When the PAPER JAM error message
appears despite there being no actual paper
jam, set menu #26 PAPER JAM DETECT to
NO.

A cut sheet did not eject properly. Remove
the paper manually.

This also naturally occurs at the end of a print
job or EJECT/LOAD function and the paper
has not yet been removed from the paper
rack.
This error occurs if menu item # 25 PAPER SKEW
DETECT has been changed to YES and the printer
detects that a cut sheet paper is loaded at an angle
beyond the printer’s ability to square it.

The ERROR lamp blinks, the buzzer sounds
three times and the paper is ejected.

Reload the paper straight.
This error also occurs if the paper is loaded straight
but is too narrow.
• To load cut sheets narrower than 4 ½ inches,
verify menu item # 25 PAPER SKEW
DETECT has been disabled (set to NO).
PAPER JAM
REMOVE PAPER
SKEW ERROR