AMT Datasouth Accel 7350 - Manual (Page 8)

Chapter 1
Page 7 of 46
• Connecting the printer to the power source
• Make sure that the power switch is set to off. Connect
the printer with the supplied power cord to an AC
outlet.
Connect the AC power plug to an AC outlet of the
voltage designated on the rating label on the back of
the printer.
• The AC outlet shall be installed near the printer and
shall be easily accessible.
• Connecting the printer to the computer
1.
Parallel interface
Make sure the power switch is turned to off.
Connect the signal cable to the printer and the
computer.
2.
Serial interface
Make sure that the power
switch is turned to off.
Connect the signal cable to
the printer and the computer.