AMT Datasouth Accel 7350 - Manual (Page 39)

Chapter 5
• How to solve the problem
1. Printing speed is slow.
Push the key SPEED and select the mode High-speed.
LQ NORMAL
HIGH 2 DRAFT
2. Printing is light
Check the condition of ribbon cassette.
If the surface of fabric becomes whitish, replace the cassette with a new
one.
Head Adjustment may not be adequate.
Adjust menu setting #1 HEAD ADJUSTMENT.
When multipart forms are used for printing.
Select “ON” , menu setting HIGH IMPACT key.
3. Paper jam often occurs.
Head Adjustment may not be adequate.
Adjust menu setting #1 HEAD ADJUSTMENT.
The thickness of paper may not be certain.
Select “YES”, menu setting #45 LF STABILIZATION.
4. Cut sheet paper is ejected as SKEW ERROR, though paper is loaded
straight manually.
Check for black pre-printing on form/paper.
Select “NO” menu setting #33 PAPER SKEW DETECTION.
Page 38 of 46