AMT Datasouth Accel 7350 - Manual (Page 41)

Chapter 5
9. Unexpected printing results.
A gap occurs between the print start position and the top end of paper.
Adjust the gap by setting #2 - #5 TOF ADJUSTMENT in the SETUP menu.
(The setting on SETUP differs in accordance with each paper path)
The unexpected printing position occurs right and left.
Adjust the tractors position moving the paper guides right and left.
Adjust #14 LEFT MARGIN in the SETUP menu to adjust the position.
The unexpected printing position occurs from the second page of fanfold
paper.
The page length of fanfold paper is not correct.
Set the paper length using menu setting #6 and #7 PAGE LENGTH.
The setting on the PC driver should also be checked.
The unexpected printing position occurs vertically after Out-of-paper.
Select “ PAGE END”, menu setting #32 PAPER OUT DETECTION.
• How to solve the error message
1. Functional error message
The functional errors mean that a serious error has occurred that cannot be
recovered by the key operation.
When a functional error occurs, turn the power off once and turn the printer
on after removing paper inside the printer.
If the message remains still after the above procedure, please contact your
dealer where the printer was purchased for service.
Page 40 of 46