AMT Datasouth FM 4600 plus - Manual (Page 4)

Page 4 of 8
February 2012 Document #140194
Pressed during normal operation
Button Function
FEED The printer will Feed a one label.
PAUSE
The printer will begin blinking the READY LED.
If printing the printer will STOP printing, and the READY
LED will blink.
If pressed a second time the printer will resume normal
operation.
Models will blink the READY LED and display PAUSE on
the LCD display while in the Paused condition.
CANCEL
The printer will Stop printing and delete any further
information in the printer's buffer. The user must realign
the media by pressing the FEED button, following this
function.
Models will blink the READY LED and display CANCEL on
the LCD display while in the Paused condition.
Pressed for Special functions
Button Function
FEED
PAUSE
(RELEASE
BUTTONS)
Enter into the printer's Setup menu.
See the Front Panel Setup Menu section for more
information.