American Sanders CE7 & Pro Edgers - Manual (Page 6)

EN ENGLISH
-6- Clarke ® American Sanders Operator's Manual (EN) - CE7 Pro, SE7 Pro, CE7 Pro+, SE7 Pro+
Part No. 07170A 07176A 07180A 07175A
Model CE 7 PRO+ SE 7 PRO + SE7 PRO CE7 PRO
V 120 120 120 120
A 12 12 12 12
W 1.3 kW 1.3 kW 1.3 kW 1.3 kW
Hz 60 60 60 60
Cable 25' 14-3 25' 14-3 NA NA
Grey Rubber Grey Rubber
Vibration Exposure 4.9 m/s 2 4.9 m/s 2 4.0 m/s 2 4.0 m/s 2
Sound Emissions 91 dB(A) 91 dB(A) 91 dB(A) 91 dB(A)
Pad Speed 3640/3030 rpm 3640/3030 rpm 3640 rpm 3640 rpm
Abrasive (in/mm) 7/178 Hook & loop 7/178 Hook & loop 7/178 Hook & loop 7/178 Hook & loop
or 7/8" Mounting hole or 7/8" Mounting hole or 7/8" Mounting hole or 7/8" Mounting hole
Air Flow (CFM) 136 136 136 136
Effective Reach 5.24/13.31 3.76/9.55 3.76/9.55 5.24/13.31
@ 3.5" Height (in/cm)
Dimensions (in/cm) 16.61x11.78x12.69 / 15.02x11.78x12.68 / 15.02x11.78x12.68 / 16.6x11.78x12.69 /
42.2x29.932.2 38.2x29.9x32.2 38.2x29.9x32.2 42.2x29.9x32.2
Weight (lbs./kg) 36.5 / 16.6 35.5 / 16.1 33.0 / 15.0 34.0 /15.5
Weight (lbs./kg) 47.5 / 21.6 46.5 / 21.1 39.5 / 18.0 40.5 / 18.4
Dimensions (in/cm) 20x17.25x22.75 / 20x17.25x22.75 / 20x17.25x22.75 . 20x17.25x22.75 /
51x43.8x57.8 51x43.8x57.8 51x43.8x57.8 51x43.8x57.8
Shipping Performance Environmental Electrical
INTRODUCTION AND MACHINE SPECIFICATIONS
The models CE and SE 7 were designed for floor sanding where larger machines are impractical or cannot reach. They are suitable
for rough and finish sanding on strip or parquet flooring. They can be used on a wide variety of wood species including pine, oak, or
maple. The added reach enables them to be used under obstructions or toe-kick. Either model will accept 7” x 7/8” mounting hole
or 7” hook and loop abrasive.