Alwarerc Senrigan GP-45 Brushless Gimbal With Advanced Landing Gear - Manual (Page 8)

Step 9.
Install the Coupler Carbon Boom with Spine Mount
using M2x6mm Hex Cap Screw.
(Apply little amount of Thread Locker when securing
screw to metal parts.)
Step 10.
Insert two
Boom Mounts onto the Coupler Carbon
Boom.
Step 11.
Prepare the Assembly from step 10 and the Bottom
Mounting Plate. Step 12.
Install the Bottom Mounting Plate onto the Boom
Mounts using M2.6x18mm Hex Cap Screws with
M2.5 Self Lock Nuts.
Page 8 of 16