Assembly steps – imu mounting – Alwarerc Senrigan GP-45 Brushless Gimbal With Advanced Landing Gear User Manual

Page 10

Text mode
Original mode

Assembly Steps – IMU Mounting

Step 1.
Prepare the IMU Unit. There is a specific orientation
requirement to mount the IMU Unit.

Step 2.
Use a double-sided foam tape to stick onto the back
side of IMU Unit.

Step 3.
Stick the IMU Unit onto the Bottom Stand Plate using
double-sided foam tape. Check the double faced
adhesive tape regularly to ensure that the IMU is
securely positioned.

(Ensure the orientation of the

IMU is installed correctly.)

Step 4.
Close view for the IMU installation.

Update:
New version GP-45 Gimbal has the newer firmware
installed which allows 90 degree Tilting. And the IMU
will be needed to place on top of the Camera.

Page 10 of 16