Troubleshooting, End of manual – Alwarerc Senrigan GP-45 Brushless Gimbal With Advanced Landing Gear User Manual
Page 17
10. Troubleshooting
Q1: Why does the gimbal not stabilize the camera?
A: Please check the battery voltage and if the LED is lit.
Q2: Why is the gimbal not stabilizing the camera in right direction?
A: Please refer to installation and make sure the IMU Unit is installed at right orientation and the motors
are connected to right pins.
Q3: Why is the gimbal shaking?
A: Usually it is caused be wrong IMU facing, please make sure it is facing down. Refer to IMU Mounting
section.
Q4. Why is the captured video shaking?
A: Please ensure your Aircraft is well turned with minimum vibration before mounting the Gimbal. Double
check the CG of the Camera, make sure the Camera is well balanced. Refer to CG Adjustment section.
Q4: Do I need to upgrade to latest version of firmware or adjust any parameters?
A: For this Basic Version, it is not necessary to upgrade the firmware or adjust any parameters unless further
instruction is given. The Brushless Gimbal Controller is preset to plug-n-play with GoPro or simlar size camera.
The gimbal controller is preset to give the best performance.
Q5: Where can I get more help for this product?
A: Please contact our distributors for warranty and customer service.
# Report any mistakes, please email to:
Related Videos could be found on:
End Of Manual
Page 17 of 16