Alwarerc Senrigan GP-45 Brushless Gimbal With Advanced Landing Gear - Manual (Page 15)

Step 5.
Secure the Gimbal Controller on the landing gear or
on the bottom frame of your F450/ F550 Multicopter
with tap Adhesive Tapes, Zip Tie or double-sided
foam tape. Step 6.
Bottom view of Gimbal Controller mounting on the
landing gear. Connect the Tilt or Roll Axis Manual
Control Connector to any free channels of your
Receiver as to control the Tilt Axis manually. The
Gimbal is recommended to power with 11.1V 3S Lipo
Battery with JST connector.
Page 15 of 16