Step 3: gimbal balancing – pitch axis – Alwarerc Lensman-Pro 3 Axis DSLR Brushless Gimbal (For Handheld/ DJIS800/ 1000) User Manual

Page 9

Text mode
Original mode

STEP 3: Gimbal Balancing – Pitch Axis

Balancing the Center of Gravity (CG) for a Brushless Gimbal is extremely import. The more accurate the CG, the better the gimbal
performance will be. Balancing require experience and time, so be patient.

Before start Balancing the Gimbal, make sure

your Camera has all accessory(e.g. Battery, SD

Card etc.) installed.

Secure your Camera completely.

Adjust the Camera to the middle position and

lock it by the Position Lock.

Loosen two Screws

(Hold the Camera at the

same time)

Adjust the Camera to be closer to the Gimbal

Frame.

Keep in 90 Degree angle before tighten the

Screws.