Alwarerc Lensman-Pro 3 Axis DSLR Brushless Gimbal (For Handheld/ DJIS800/ 1000) User Manual

Page 15

Set the Gimbal Main Assembly to be around

45 degree. Tilt the Handle, the Camera

should remain steady if the CG is correct.

If not, loosen these 2 screws and do the

adjustment.

Adjust the CG by given a small rotation of the

assembly.

Tighten the Screws and test again.

The Camera should remain steady if it got the

correct CG position. If not, repeat the

previous steps and for the adjustment again.

(Be Patient Here)