Set up- cvbs – Altech UEC PVR6600 User Manual
Page 13
13
Connect the HDMI cable from the HDMI interface output of the Set Top
Box to the HDMI interface input of the TV monitor.
2.3. Connect the antenna
Connect the antenna lead to the “ANTENNA IN” connection on the rear of
the Set Top Box.
2.4. Connect the power
a) Plug the connector of the power line of the receiver into the socket.
b) Connect the power to your monitor and turn it on, you are now ready to
get started.
3. SET UP- CVBS
For this Basic Set Up use a CVBS lead for the video connection and either
the red and white of RCA leads that came with this Set Top Box or an
optical cable for the audio connection.
All of video output modes are active simultaneously
3.1. Prepare your equipment
Make sure that your monitor has CVBS (VIDEO, AUDIO R, AUDIO L)
input.