ADLINK Medical-i7 18/21 - Manual (Page 50)

PENTA Medical i5/i7
Manual
Rev. 1.5
Document: Manual_Medical_i7_R1.5.docx Page 50 of 59 pages Last change date: 7-Mar-13
11.3. Tables according EN60601-1-2:2001:
11.3.1. Table 201
Guidance and manufacturer´s declaration – electromagnetic emission – for all EQUIPMENT
AND SYSTEMS (see 6.8.3.201 a) 3))
Guidance and manufacturer´s declaration – electromagnetic emission
The PENTA is intended for use in the electromagnetic environment specified below. The
customer or the user of the PENTA should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
The PENTA uses RF energy only for its
internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B
The PENTA is suitable for use in all
establishments, including domestic establishments and
those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic
purposes.
Harmonic
emissions
IEC 61000-3-2
Class A
Voltage
fluctuations /
flicker emissions
IEC 61000-3-3
Complies