ADLINK Medical-i7 18/21 - Manual (Page 23)

PENTA Medical i5/i7
Manual
Rev. 1.5
Document: Manual_Medical_i7_R1.5.docx Page 23 of 59 pages Last change date: 7-Mar-13
•
Change Settings
Use the
Change Settings option to change the serial port IO address and interrupt
address. The assortment of settings differs according to the selected Serial Port.
Possible settings will not be listed below. The default setting is [Auto].
•
Auto Default The serial port IO address and interrupt
address are automatically detected.
7.3.6. H/W Monitor
The H/W Monitor menu shows the operating temperature, fan speeds and system voltages.
PC Health Status
The following system parameters and values are shown. The system parameters that are monitored
are:
•
CPU Temperature
•
System Temperature
•
CPU Fan Speed
•
System Fan Speed
•
VCC3V
•
Vcore
•
+5V
• +12V
•
+1.5V
•
VSB3V
•
VBAT