ADLINK RuffSystem 800 - Manual (Page 12)

RuffSystem Setup
8 User’s Guide RuffSystem
Figure 3. Flat View of RuffSystem I/O Panel
Connecting Peripherals
7) Connect the cables and
their respective peripheral
cables/devices. • Refer to Figure 3 for locations and descriptions of the connectors and
controls before making connections or powering on the RuffSystem.
• Connect the keyboard to the appropriate connector on the RuffSystem
I/O panel (USB or PS/2).
• Connect the mouse to the appropriate connector on the RuffSystem
I/O panel (USB or PS/2).
• Connect the CRT or LCD monitor through its 15-pin cable to the VGA
Monitor connector on the I/O panel.
PARALLEL
SERIAL 2 SERIAL 1
SERIAL 4 SERIAL 3
ETHERNET1 ETHERNET 2
USB 4 USB 2
USB 1 USB 3 VGA KYBD/MS RESET
DC IN
AUDIO LIN MIC
Monitor
Reset Button
Serial Ports (1-4)
DC
Power
In
Ethernet 1 (left) and Ethernet 2 (right)
Microphone In
Mouse/Keyboard
(PS/2)
USB Ports (1-4)
Parallel Port
Power LED
Stereo Audio Out
Stereo Audio In
Power Switch