beautypg.com

2 cpu configuration, Lvds1 panel type selection, Lvds2 panel type selection – ADLINK IMB-T10 User Manual

Page 49: Primary graphics adapter, Acpi hpet table

background image

BIOS Setup

37

IMB-T10

4.3.2

CPU Configuration

LVDS1 Panel Type Selection

Use this to select LVDS1 panel type. The default value is
[1366x768/18- bit/1-ch/LED].

LVDS2 Panel Type Selection

Use this to select LVDS2 panel type. The default value is
[1366x768/18- bit/1-ch/LED].

Primary Graphics Adapter

This allows you to select the boot graphic adapter priority. The
default value is [VBIOS Default].

ACPI HPET Table

Use this option to enable or disable ACPI HPET Table. The default
value is [Enabled]. Please set this option to [Enabled] if you plan to
use this motherboard to submit Windows® certification.

See also other documents in the category ADLINK Hardware: