ADLINK AmITX-IB-I - Manual (Page 38)

26 Getting Started
3.4 Driver Installation
The AmITX-IB-I drivers for Windows 7 32-bit are located in the
following directories on the Driver CD, or can be downloaded from
the ADLINK website (http://www.adlinktech.com):
Follow the instructions below to install the required AmITX-IB-I
drivers. Install the Windows operating system before installing any
driver. Most standard I/O device drivers are installed during Win-
dows installation.
1. Install the Chipset driver by running the program
X:\AmITX-IB-I_Driver\CHIP\Chipset driver_Intel_INF_
Update_Utility_All_WinOS\infinst_autol_9.2.0.1030.exe
.
Follow the instructions given and reboot when instructed.
2. Install the Display driver and utilities by running the program
X:\AmITX-IB-I_ Driver\VGA\Ivy Bridge\ VGA_driver_intel_
Integrated_Graphics_Windows7_64bit\Setup.exe
. Follow the
instructions given and reboot when instructed.
3. Install the LAN driver by running the program
X:\AmITX-IB-I_ Driver\LAN\ Network_driver_Realtek_
Network_Adapter for Windows 7\Setup.exe
. Follow the
instructions given and reboot if required.
4. Install the Audio driver by running the program
X:\AmITX-IB-I_ Driver\Audio_driver_Realtek_Windows 7\
64Bit\64bit_Vista_Win7_Win8_R270.exe
. Follow the instruc-
tions given and reboot if required.
Chipset
X:\AmITX-IB-I_Driver\CHIP\
Display
X:\AmITX-IB-I_Driver\VGA\Ivy Bridge\
VGA_driver_intel_Integrated_Graphics
_Windows7_64bit\
LAN
X:\AmITX-IB-I_Driver\LAN\Win7\Network_driver_Realtek
_Network_Adapter for Windows 7\
Audio
X:\AmITX-IB-I_Driver\Audio_driver_Realtek_Windows 7\
USB 3.0 X:\AmITX-IB-I_Driver\USB 30_driver_Renesas
_All_WinOS\