Table b-5: irq lines apic mode – ADLINK NuPRO-A40H User Manual
Page 93
System Resources
79
NuPRO-A40H
Table B-5: IRQ Lines APIC Mode
Notes:
(1) These IRQs can be used for PCI devices when the onboard device
is disabled. If the IRQ is from ISA, the user must reserve the IRQ for
ISA in the BIOS setup menu.
(2) The BIOS does not open the IRQ 9 setting for the ISA bus.
10
Serial Port 6 (COM6) /
ISA
IRQ10 via SERIRQ, IRQ10 at
ISA bus
Note (1)
11
ISA
IRQ11 via SERIRQ, IRQ11 at
ISA bus
Note (1)
12
PS/2 Mouse / ISA
IRQ12 via SERIRQ, IRQ12 at
ISA bus
Note (1)
13
Math Processor
N/A
No
14
Primary IDE controller /
ISA
IRQ14 via SERIRQ, IRQ14 at
ISA bus
Note (1)
15
Secondary IDE
controller / ISA
IRQ15 via SERIRQ, IRQ15 at
ISA bus
Note (1)
16
N/A
PCIE Port 0, EHCI Controller
#2, I.G.D,
Intel Management Engine
Interface,PCIE to PCI
Bridge(IT8892),PCI SLOT1
Yes
17
N/A
PCI SLOT4
Yes
18
N/A
PCIE Port 2, Intel I211 LAN.
PCI SLOT3
Yes
19
N/A
PCIE Port 3 SATA Host
controller #1, SATA Host
controller #2, Intel I211 LAN.
PCI SLOT2
Yes
20
N/A
N/A
No
21
N/A
N/A
No
22
N/A
N/A
No
23
N/A
EHCI Controller #1
No
IRQ#
Typical Interrupt
Resource
Connected to Pin
Available