ADLINK NuPRO-A40H User Manual
Page 78
64
BIOS Setup
Quiet Boot
When this feature is enabled, the BIOS will display the full-
screen logo during the boot-up sequence, hiding normal POST
messages. When it is disabled, the BIOS will display the nor-
mal POST messages, instead of the full-screen logo.
Fast Boot
Enabled/Disabled boot with initialization of a minimal set of
devices required to launch active boot option. Has no effect for
BBS boot options.
Gate A20 Active
Options: Upon Request, Always.
Option ROM Messages
Set display mode for Option ROM.
INT19 Trap Response
BIOS reaction on INT19 trapping by Option ROM: IMMEDI-
ATE- execute the trap right away; POSTPONED-execute the
during legacy boot.
Boot Option Priorities
Set the boot device options to determine the sequence in which
the computer checks which device to boot from.
Hard Drive BBS Priorities
The Boot devices are listed in groups by device type. First
press
arrow keys to select the desired device, then press <+>, <-> or
list. For example, USB storage disks will be listed as "USB
Drives" in the sub-menu. Only the first device in each device
group will be available for selection in the Boot Device Priority
option.