4 pci/pnp settings, 1 irq/dma, Pci/pnp settings – ADLINK NuPRO-E330 User Manual

Page 73

Text mode
Original mode

BIOS Setup

NuPRO-E330

5.4

PCI/PnP Settings

Select the PCI/PnP tab from the setup screen to enter the Plug
and Play BIOS Setup screen. You can display a Plug and Play
BIOS Setup option by highlighting it using the < Arrow > keys. The
Plug and Play BIOS Setup screen is shown below.

5.4.1

IRQ/DMA

Set this value to allow the IRQ settings to be modified. Available –
This setting allows the specified IRQ/DMA to be used by a PCI/
PnP device. Reserved – This setting allows the specified IRQ/
DMA to be used by a legacy ISA device.