ADLINK NuPRO-E330 - Manual (Page 52)

38 Driver Installation
4.6 Intel® Active Management Technology
Follow these instructions to install the Intel® Active Management
Technology driver.
1. Locate the directory
X:\NuPRO\NuPRO-E330\Others\ on the ADLINK All-in-One
DVD, and extract the file setup.exe from the following
archive:
iAMT_Intel_Management_Engine_Interface_SOL_driver_
All_WinOS_v6.0.0.1195.zip.
2. Run the program setup.exe and follow the onscreen
instructions. Restart the system if prompted.
4.7 TPM Driver
Follow these instructions to install the TPM driver.
1. Locate the directory
X:\NuPRO\NuPRO-E330\TPM\ on the ADLINK
All-in-One DVD, and extract the file setup.exe from the
following archive: ST_TPM_All_WinOS_v3.5.SP1.zip.
2. Run the program setup.exe and follow the onscreen
instructions. Restart the system if prompted.
4.8 Audio Driver
Follow these instructions to install the audio driver for the optional
DB-Audio2 daughter board.
1. Place the ADLINK All-in-One DVD to the optical drive.
2. Locate the audio driver from the directory
X:\Audio Daughter Board\DB-Audio2\, then dou-
ble-click on the setup.exe file to start installation.
3. Follow the screen instructions to complete installation,
then restart the system if prompted.
NOTE: NOTE:
Before installing the audio driver, check the BIOS settings to
make sure that audio is enabled: Chipset > PCH Configura-
tion > HDA Controller (see “PCH Configuration” on
page 68).