ADLINK NuPRO-E330 - Manual (Page 68)

54 BIOS Setup
5.3.7 Remote Access Configuration
Remote access configuration provides the settings to allow remote
access by another computer to get POST messages and send
commands through serial port access.
Remote Access
Select this option to Enable or Disable the BIOS remote access
feature.
Serial Port Number
Select the serial port you want to use for the remote access
interface. You can set the value for this option to COM1 or
COM2.
NOTE: NOTE:
Enabling Remote Access requires a dedicated serial port con-
nection. When the assigned serial port is disabled, Remote
Access should also be disabled to prevent the system from
booting abnormally.