ADLINK NuPRO-E330 - Manual (Page 41)

Getting Started 27
NuPRO-E330
3 Getting Started
This chapter provides information on how to install components on
the NuPRO-E330 SHB.
3.1 Installing the CPU
The NuPRO-E330 supports an Intel® Core™ i7/i5/i3 or Pentium®
processor in an LGA1156 socket.
To install the CPU:
1. Press down on the locking arm (A), then push it away from
the socket to disengage it from the retention tab (B).
WARNING:
Disconnect all power to the board before
installing a CPU to prevent damaging the
board and CPU.
Do not touch socket contacts. Damaging the
contacts voids the product warranty. Follow
the installation instructions carefully to avoid
damaging the board components.
A
B