ADLINK MXE-200i - Manual (Page 45)

Driver Installation 31
MXE-200
3.4 Installing the USB 3.0 Driver
To install the driver for the USB 3.0 controller:
1. Close any running applications.
2. Insert the ADLINK All-in-One DVD. The Ethernet driver
is located in:
x:\Driver Installation\Matrix\MXE-200\USB3.0\
where x: denotes the DVD-ROM drive.
3. Launch setup.exe and follow onscreen instructions to
complete the setup.
4. After installation is complete, reboot the system.
3.5 Installing the I/O Driver
To install the driver for the I/O controller:
1. Close any running applications.
2. Insert the ADLINK All-in-One DVD. The Ethernet driver
is located in:
x:\Driver Installation\Matrix\MXE-200\IO Drivers\
where x: denotes the DVD-ROM drive.
3. Execute setup.msi and follow onscreen instructions to
complete the setup.
4. After installation is complete, reboot the system.
3.6 Installing the SEMA Utility, WDT and DI/O Drivers
The MXE-200 supports ADLINK Smart Embedded Management
Utility with features as follows.
X System Health for real time CPU, system temperature, total/
current uptime
X User-defined 1KB Flash
X Watchdog Timer
X Hardware Monitoring for input voltage levels and current
power consumption
A WDT (watchdog timer) is a hardware mechanism resetting the
system when the operating system or application is halted. A typi-