ADLINK LEC-3517 - Manual (Page 7)

Overview 3
LEC-3517
1.3 Connectors
Table 1-2 describes the connectors shown in Figure 1-3.
Figure 1-3: Connector Location (Top Side)
1.4 Specifications
Physical Specifications
Table 1-3 lists the physical dimensions of the module.
Table 1-2: Module Connector Description
Connector#
Board
Access
Description
J1 – SMARC P-S Top/
Bottom 314-pin, MXM edge connector for Memory, Video, and I/O
functions.
JTAG1 Top 10-pin connector for debugging
LED1 Top Green LED for Power On
Table 1-3: Weight and Footprint Dimensions
Item Dimension
Overall height is measured from the upper board
surface to the top of the highest permanent
component (JTAG1 connector) on the upper board
surface. This measurement does not include the
cooling solution, which can vary. The cooling
solution will probably increase this dimension.
Weight 0.02 kg (0.05 lb)
Height (overall) 3.05 mm (0.12 inches)
Board thickness 1.27 mm (0.05 inches)
Width 50.00 mm (1.97 inches)
Length 82.00 mm (3.23 inches)
J1
LEC_3517_T
op_Conn_a
Key:
J1 - SMARC Connector