ADLINK LEC-iMX6 - Manual (Page 20)

16 Interface Signals
4 Interface Signals
4.1 SMARC Interface
Table 4-1 provides the pin signals for the SMARC P-S connector. Refer to the SMARC specifica-
tion at
http://www.sget.org/standards/smarc.html for definitions of the SMARC signals.
Table 4-1: SMARC P-S Connector (J1) Signal Descriptions
Pin # Primary (Top Side) Pin # Secondary (Bottom Side)
S1 PCAM_VSYNC
P1 PCAM_PXL_CK1 S2 PCAM_HSYNC
P2 GND S3 GND
P3 CSI1_CK+/PCAM_D0 S4 PCAM_PXL_CK0
P4 CSI1_CK-/PCAM_D1 S5 I2C_CAM_CK
P5 PCAM_DE S6 CAM_MCK
P6 PCAM_MCK S7 I2C_CAM_DAT
P7 CSI1_D0+/PCAM_D2 S8 CSI0_CK+/PCAM_D10
P8 CSI1_D0-/PCAM_D3 S9 CSI0_CK-/PCAM_D11
P9 GND S10 GND
P10 CSI1_D1+/PCAM_D4 S11 CSI0_D0+/PCAM_D12
P11 CSI1_D1-/PCAM_D5 S12 CSI0_D0-/PCAM_D13
P12 GND S13 GND
P13 CSI1_D2+/PCAM_D6 S14 CSI0_D1+/PCAM_D14
P14 CSI1_D2-/PCAM_D7 S15 CSI0_D1-/PCAM_D15
P15 GND S16 GND
P16 CSI1_D3+/PCAM_D8 S17 Not connected
P17 CSI1_D3/PCAM_D9 S18 Not connected
P18 GND S19 Not connected
P19 GBE_MDI3- S20 Not connected
P20 GBE_MDI3+ S21 Not connected
P21 GBE_LINK100# (Ethernet Speed LED) S22 Not connected
P22 GBE_LINK1000# (Ethernet Speed LED) S23 Not connected
P23 GBE_MDI2- S24 Not connected
P24 GBE_MDI2+ S25 GND
P25 GBE_LINK_ACT# (LAN Link LED) S26 SDMMC_D0
P26 GBE_MDI1- S27 SDMMC_D1
P27 GBE_MDI1+ S28 SDMMC_D2
P28 GBE_CTREF S29 SDMMC_D3
P29 GBE0_MDI0- S30 SDMMC_D4
P30 GBE0_MDI0+ S31 SDMMC_D5
P31 SPI0_CS1# S32 SDMMC_D6
P32 GND S33 SDMMC_D7
P33 SDIO_WP S34 GND
P34 SDIO_CMD S35 SDMMC_CK
P35 SDIO_CD# S36 SDMMC_CMD
P36 SDIO_CK S37 SDMMC_RST#
P37 SDIO_PWR_EN S38 AUDIO_MCK
P38 GND S39 I2S0_LRCK
P39 SDIO_D0 S40 I2S0_SDOUT
P40 SDIO_D1 S41 I2S0_SDIN
P41 SDIO_D2 S42 I2S0_CK