ADLINK LEC-iMX6 - Manual (Page 10)

6 Overview
1.4.3 Power Specifications
Table 1-4 provides the power requirements for this module.
Operating configurations:
 In-rush operating configuration - Typical
 Idle operating configuration - Typical
 BIT operating configuration - Typical
1.4.4 Environmental Specifications
Table 1-5 provides the most efficient operating and storage condition ranges required for this
module.
1.4.5 Thermal/Cooling Requirements
The LEC-iMX6 is designed to operate at its maximum CPU speed and requires a thermal solu-
tion. ADLINK offers one cooling option described in Table 1-6.
Table 1-4: Power Supply Requirements
Parameter
800MHz
Characteristics
Input Type +3V to +5.25V Regulated DC voltage
In-rush Current @5V:
• Solo: 443mA
• Dual Lite: 456mA
• Dual: 794mA
• Quad: 813mA
Typical Idle Current @ 5V:
• Dual: 337mA
• Quad: 362mA
BIT (Burn-In Test) Current @5V:
Solo: 509mA
Dual Lite: 524mA
Dual: 902mA
Quad: 907mA
Table 1-5: Environmental Requirements
Parameter Conditions
Temperature
Extended
–40° to +85° C (–40° to +185° F)
Storage –55° to +85° C (–67° to +185° F)
Humidity
Operating
5% to 90% relative humidity, non-condensing
Non-operating 5% to 95% relative humidity, non-condensing
CAUTION: The optional heat spreader plate requires another form of cooling, such as a fan. A
heat spreader plate is not a complete thermal solution for the LEC-iMX6.
CAUTION: The overall system design must keep the ICs within their operating temperature
specifications.
Table 1-6: ADLINK Optional Cooling Option
Option Description
Heat Spreader Provides a simple thermal platform on which to build a cooling solution.
The heat spreader is available as an optional order item.