ADLINK nanoX-BASE - Manual (Page 34)

nanoX-BASE User’s Manual Page 34
Note: <<<< indicates default setting
JP2: Clear CMOS
To clear CMOS, shut down the power and
short pins 2 and 3 (shorts VBAT to ground).
Jumper Status
1-2 Normal <<<<
2-3 Clear CMOS
1
2
3
JP6: Super I/O Address
Selects the address of the Super I/O.
Jumper Status
1-2 4EH
2-3 2EH <<<<
1
2
3
JP10: Super IO
Enables/disables the Super IO.
Jumper Status
1-2 Enable <<<<
2-3 Disable
JP9: Keyboard Controller Function
Enables/disables the Keyboard Controller
on the Super I/O.
Jumper Status
1-2 Enable <<<<
2-3 Disable
1
2
3
1
2
3
6.25 Other Jumper Settings
JP18, JPX3: BIOS Selection
See Chapter 7: Secondary BIOS
for a detailed description.
JPX3 JP18 Status
1-2 1-2 Module BIOS <<<<
1-2 2-3 Carrier FWH (Type 1)
2-3 1-2 Carrier SPI (Type 10)
2-3 2-3 Reserved
1
2
3