24 power jumper settings, Jp1: atx/at mode, Jpx2: at power 5v setting – ADLINK nanoX-BASE User Manual
Page 33: Jp21: ps_on# signal source

Page 33
nanoX-BASE User’s Manual
JP1:
ATX/AT Mode
In AT mode, JP1 shorts PS_ON# to
ground directly to force power on.
Jumper
Status
1-2
ATX mode
<<<<
2-3
AT mode
1
2
3
JPX2:
AT Power 5V Setting
With an AT power supply is connected to
the nanoX-BASE, JPX2 can be used to
provide 5VSB to the COM module from
the carrier board.
Jumper
Status
1-2
AT without P5V
<<<<
2-3
AT with P5V
1
2
3
JP21:
PS_ON# Signal Source
Jumper
Status
1-2
SUS_S3#
<<<<
2-3
SUS_S5#
All ADLINK modules support S3 mode and use
the SUS_S3# signal to control the PS_ON#
signal which is used to turn the ATX power
supply on and off. This jumper should be set to
SUS_S3# as signal source to allow normal
operation (even when S3 mode is disabled in
the BIOS). To accomodate non-standard
designs that use SUS_S5# as the signal source
to control PS_ON#, set the jumper to SUS_S5#.
Note:
<<<< indicates default setting
1
2
3
6.24 Power Jumper Settings
- USB-1901 (84 pages)
- USB-1210 (54 pages)
- USB-2401 (60 pages)
- USB-7230 (50 pages)
- USB-2405 (56 pages)
- DAQe-2010 (92 pages)
- DAQe-2204 (100 pages)
- DAQe-2213 (94 pages)
- DAQe-2501 (74 pages)
- PXI-2010 (84 pages)
- PXI-2020 (60 pages)
- PXI-2501 (62 pages)
- cPCI-9116 (98 pages)
- ACL-8112 Series (93 pages)
- ACL-8112 Series (94 pages)
- ACL-8112 Series (92 pages)
- ACL-8216 (75 pages)
- ACL-8111 (61 pages)
- PCM-9112+ (10 pages)
- PCM-9112+ (94 pages)
- cPCI-6216V (47 pages)
- ACL-6126 (28 pages)
- ACL-6128A (40 pages)
- PCM-6308V+ (52 pages)
- PCM-6308V+ (4 pages)
- PCI-7444 (82 pages)
- PCI-7434 (48 pages)
- PCI-7234 (56 pages)
- PCI-7260 (66 pages)
- PCI-7258 (38 pages)
- PCI-7256 (48 pages)
- PCI-7250 (48 pages)
- LPCI-7250 (48 pages)
- PCI-7396 (65 pages)
- PCI-7296 (59 pages)
- PCI-8554 (67 pages)
- PCIe-7360 (94 pages)
- PCIe-7350 (86 pages)
- PCIe-7300A (114 pages)
- PCIe-7200 (51 pages)
- PCI-7300A (83 pages)
- PCI-7300A (112 pages)
- PCI-7200 (96 pages)
- cPCI-7300 (82 pages)
- cPCI-7300 (83 pages)