ADLINK nanoX-BT - Manual (Page 52)

Page 52 nanoX-BT
Feature Options Description
SCC Configuration Info only
SCC eMMC Support Enable eMMC 4.5 Support
Enable eMMC 4.41 Support
eMMC AUTO MODE
Disable SCC eMMC support enable/disable.
SCC eMMC 4.5 DDR50 Support Enabled
Disabled SCC eMMC 4.5 DDR50 support enable/disable.
SCC eMMC 4.5 HS200 Support Enabled
Disabled SCC eMMC 4.5 HS200 support enable/disable.
eMMC Secure Erase Enabled
Disabled Disable/Enable eMMC secure erase. When enabled, all the data
on eMMC will be erased.
SCC SD Card Support Enabled
Disabled SCC SD card support enable/disable.
SDR25 Support for SDCard Enabled
Disabled Disable/Enable SDR25 capability in SD Card controller.
MIPI HIS Support Enabled
Disabled MIPI HIS support enable/disable.
LPSS Configuration Info only
LPSS DMA #1 Support Enabled
Disabled LPSS DMA #1 support enable/disable.
LPSS HSUART #1 Support Enabled
Disabled LPSS HSUART #1 support enable/disable.
7.3.13.2. Miscellaneous > BIOS Security Configuration
Feature Options Description
BIOS Security Configuration Info only
Global SMI Lock Enabled
Disabled Enable or disable SMI lock.
7.3.13.3. Miscellaneous > Trusted Computing
Feature Options Description
Coniguration Info only
Security Device Support Enabled
Disabled Enables or disables BIOS support for security device. OS will
not show security device. TCG EFI protocol and INT1A interface
will not be available.
Current Status Information Info only
7.4. Boot
7.4.1. Boot Configuration
Feature Options Description
Boot Configuration Info only
Setup Prompt Timeout 1 Number of seconds to wait for setup activation key. 65535 (0xFFFF )
means indefinite waiting.