ADLINK Express-IBE2 - Manual (Page 68)

Page 68 Express-IBE2
Memory Configuration
DIMM profile
Select DIMM timing profile that should be used.
Memory Frequency Limiter
Maximum Memory Frequency Selections in MHz.
ECC Support
Enable or disable DDR ECC Support.
Max TOLUD
Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed
graphic controller.
NMode Support
NMode support option.
Memory Scrambler
Enable or disable Memory Scrambler support.
MRC Fast Boot
Enable or disable MRC fast boot.
Force Cold Reset
Force cold reset or choose MRC cold reset mode, when cold boot is required during MRC execution. Note: If ME 5.0MB is present,
force cold reset is required!