ADLINK cPCI-6930 - Manual (Page 22)

8 Specifications
Serial Ports Up to three 16C550 serial ports
• One DB-9 RS-232 serial port on front panel
• Two serial ports routed to rear I/O through J3
USB • Two USB 3.0 ports on front panel
• Three USB 2.0 ports on front panel, six ports routed to J3
KB/MS • PS/2 Keyboard/Mouse port to J3
Audio • High Definition Audio signals routed to J3
TPM Infineon SLB 9635 TPM
• Over/Under voltage detection
• Low/High frequency sensor/filter
• Reset filter
• Memory Encryption/Decryption
Storage
Interface
1
• Onboard 4GB SATA NAND flash
• One SATA 6 Gb/s direct connector for 2.5" onboard
HDD/SDD (removable)
1
• Optional CompactFlash socket onboard via DB-CF-SA
adapter board (shares space with SATA direct connector)
• Optional CFast socket onboard via DB-CFAST adapter
board (shares space with SATA direct connector)
• Optional SAS direct connector for 2.5" onboard drive
(shares space with SATA direct connector; not available
concurrently with COM, USB, PMC/XMC site on layer 2 -
requires BOM option)
BIOS • AMI EFI BIOS, 64Mbit SPI flash memory
Faceplate I/O • 4x 10/100/1000BASE-T Ethernet ports
• 1x VGA port
• 3x USB 2.0 ports
• 2x USB 3.0 ports
• 1x DB-9 COM port
• PMC/XMC slot
OS
Compatibility • Microsoft Windows 7 32/64-bit
• Microsoft Windows Server 2008 32/64-bit
• Red Hat Enterprise Linux 6.1 x86 64-bit
• Fedora 15 x86 64-bit
• Other OS support on request
Table 2-1: cPCI-6930 Blade Specifications