ADLINK cPCI-6930 - Manual (Page 134)

120 IPMI User Guide
OemDispDebugVariable
This command can report up to 5 interval values for debug pur-
poses. For developers only.
OemResetHost
This command is implemented to control the system’s status if
rebooting is required. Operators can control the system remotely.
OemPowerOff
This command is implemented to control the system’s status if
power-off is required. Operators can control the system remotely.
Action Byte Value Description
Request
0 C0h NetFn/LUN for OEM
1 F4h OEM defined command
Response
0 Complete Code 00h means OK
1 *Debug variable 1
2 *Debug variable 2
3 *Debug variable 3
4 *Debug variable 4
5 *Debug variable 5
NOTE: NOTE:
*Reserved for customized IPMI debugging purposes. Contact
your ADLINK representative for details.
Action Byte Value Description
Request
0 C0h NetFn/LUN for OEM
1 F5h OEM defined command
Response 0 Complete Code 00h means OK
Action Byte Value Description
Request
0 C0h NetFn/LUN for OEM
1 F6h OEM defined command