ADLINK ND-6054 - Manual (Page 65)

Command Set • 57
3
Command Set
3.1 Command and Response
3.1.1 Introduction
The NuDAM command is composed by numbers of characteristics, including
the leading code, address ID, the variables, the optional check-sum byte,
and a carriage return to indicate the end of a command. The host computer
can only command only one NuDAM module except those syncronized
commands with wildcard address “**”. The NuDAM may or may not give
response to the command. The host should check the response to
handshake with the modules.