beautypg.com

13 replacing the hard drive, Replacing the hard drive – ADLINK PXIe-3975 User Manual

Page 32

background image

20

Getting

Started

2.3.13 Replacing the Hard Drive

The PXIe-3975 provides a SATA 2.0 port with a pre-installed 2.5"
SATA hard drive. Alternatively, a 2.5" solid state disk (SSD) can be
used for shock/vibration resistance. This section explains proce-
dures for replacing the HDD.

1. Locate the four screws attaching the hard drive to the

bracket on the rear of the PXIe-3975 controller.

2. Remove the screws, as shown.

3. Gently lift and remove the SATA hard drive, as shown,

being careful to not bend or break the SATA Board-to-
Board connector.

See also other documents in the category ADLINK Hardware: