ADLINK PXIS-2508 - Manual (Page 29)

Installation 19
3.2 Installing Peripheral Modules
The PXIS-2508/2558T supports up to seven PXI/cPCI peripheral
modules, including a star trigger module.
To install a peripheral module:
1. Select an available peripheral slot (slots 2 to 8).
2. Push down (loose) the peripheral module’s ejector/injec-
tor handle(s), then align the module’s top and bottom
edges to the card guides.
3. Carefully slide the module into the chassis..
4. Pull up the ejector/injector handle until the module is
properly connected to the chassis backplane.