beautypg.com

ADLINK PXIS-2508 User Manual

Page 33

background image

Installation

23

4. Turn on the standby power switch at the front panel. The

power LED in the front panel lights up green and the
chassis fans start to operate.

To turn off the system:

1. Shut down the system via the operating system.

2. Move the standby power switch to standby position (

)

OR

3. Turn off the main power switch (O).

IMPORTANT

When you put the system into standby mode using the
standby power switch, wait three seconds before you
turn on the system again. This protects installed PXI
modules from damage.

If you turn on the system immediately from standy-by
mode, it may take at least three seconds for the POST
messages to appear on screen.

See also other documents in the category ADLINK Hardware: