ADLINK PXIS-2508 User Manual

Page 18

Text mode
Original mode

Chassis Overview

LED Indications

Alarm Reset Button

The alarm reset button enables you to stop the chassis alarm
during an error or critical system event. To stop the alarm,
press the alarm reset button.

LED

Status

Off

Blinking

Power (Blue)

DC voltages are
supplied
normally.

No DC power is
supplied.

• 5 V or 3.3 V exceeds

±7% range

• 12 V or -12 V exceeds

±12% range

Fan (Green)

Fans are
operating
normally.

The system is
off.

Any of the fans is
operating in a speed
lower than 500 RPM

Temp (Amber)

Chassis
temperature is
normal

The system is
off.

Chassis temperature
exceeds 50°C