ADLINK cPCI-6208V - Manual (Page 39)

C/C++ Library
•
31
5.9 _6208_I2V_Control
@ Description
This function is used to set the cPCI/PCI-6208A voltage-to-current
mode control. There are three range modes for the cPCI/PCI-6208A.
Please refer to section 4.2 for description of voltage to current
conversion.
@ Syntax
C/C++ (DOS)
U16 _6208_I2V_Control (U16 cardNo, U16 ctrl)
C/C++ (Windows 95)
U16 W_6208_DO (U16 cardNo, U16 DOData)
Visual Basic (Windows 95)
W_6208_I2V_Control (ByVal cardNo As Integer,
ByVal ctrl As Integer) As Integer
@ Argument
cardNo: The card number of the 6208 card
initialized. (The first card in the most
significant PCI slot is assign cardNo = 0).
ctrl: the voltage-to-current mode, the valid
modes are shown in table 3 of Operation theory.
The constants are defined in Pci_6208.h (DOS)
and Acl_pci.h (Windows 95).
@ Return Code
ERR_NoError