Acrosser AR-B9622 - Manual (Page 46)

AR-B9622 User¡ ¦s Guide
6-6
6.5 PERIPHERAL SETUP
This section is used to configure peripheral features.
AMIBIOS SETUP - PERIPHERAL SETUP
(C) 1998 American Megatrends, Inc. All Rights Reserved
Hard disk Delay Disable
OnBoard IDE Disable
OnBoard Primary IDE Primary
OnBoard Secondary IDE Secondary
OnBoard FDC Auto
OnBoard Serial Port1 3F8h
OnBoard Serial Port1 IRQ 4
OnBoard Serial Port2 2F8h
OnBoard Serial Port2 IRQ 3
OnBoard Serial Port3 3E8h
OnBoard Serial Port3 IRQ 11
OnBoard Serial Port4 2E8h
OnBoard Serial Port4 IRQ 9
OnBoard Parallel Port 3BCh
Parallel Port Mode Normal
EPP Version N/A
Parallel Port IRQ 7
Parallel Port DMA Channel N/A
OnBoard Parallel Port2 278h
Parallel Port Mode Normal
EPP Version N/A
Parallel Port IRQ 5
Parallel Port DMA Channel N/A
Available Options :
3 Sec
5 Sec
10 Sec
15 Sec
ESC:Exit ¡ ф ¡ х :Sel
PgUp/PgDn:Modify
F2/F3:Color
Figure 6-5 BIOS: Peripheral Setup
Hard Disk Delay
If this option is set to Disabled and the system BIOS executes too fast, the result is the BIOS can’ t find the hard
disk drive.
OnBoard IDE
This option specifies the onboard IDE controller channels that will be used.
OnBoard FDC
This option enables the floppy drive controller on the AR-B9622.
OnBoard Serial Port
This option enables the serial port on the AR-B9622.
OnBoard Parallel Port
This option enables the parallel port on the AR-B9622.
Parallel Port Mode
This option specifies the parallel port mode. ECP and EPP are both bidirectional data transfer schemes that
adhere to the IEEE P1284 specifications.
Parallel Port DMA Channel
This option is only available if the setting for the parallel Port Mode option is ECP.