Acrosser AR-B9622 - Manual (Page 32)

AR-B9622 User¡ ¦s Guide
4-2
The block diagram shows that AR-B9622 still needs components to be used for LCD panel. The inverter board
provides the control for the brightness and the contrast of the LCD panels while the inverter is the one that supplies
the high voltage to drive the LCD panel. Each item will be explained further in the section.
AR-B9622
CPU Board
Pin 1
CN5
LCD
Panel
Inverter & Contrast
Figure 4-2 LCD Panel Cable Installation Diagram
NOTE: Be careful with the pin orientation when installing the connectors and the cables. A wrong connection can
easily destroy your LCD panel. The pin 1 of the cable connectors is indicated with a sticker and the pin1 of
the ribbon cable is usually with different color.
4.2 SUPPORTED LCD PANELS
At present, this VGA card can provide the total solution with inverter board for the following list of standard LCD
panels. Consult your Acrosser representative for new development, when using other models of standard LCD
panels in the market.
NO. Manufacture Model No. Description
1 NEC NL-6448AC30-10 TFT 9.4”
2 NEC NL-6448AC32-10 TFT 10.2”
3 NEC NL-6448AC33-10 TFT 10.4”
4 HITACHI LMG5371 MONO 9.4” Dual Scan
5 HITACHI LMG9200 DSTN 9.4”
6 HITACHI LMG9400 DSTN 10.4”
7 ORION OGM-640CN03C-S DSTN 10.4”
8 SHARP LQ10D321 TFT 10.4”
Table 4-1 LCD Panel Type List
CAUTION: 1. If you want to connect the LCD panel, you must update the AR-B9622’ s BIOS, and then you can set
up the corrected BIOS. Please contact Acrosser for the latest BIOS update.
2. If user needs to update the BIOS version or connect other LCDs, please contact the sales
department. The detail supported LCDs are listed in the Acrosser Web site, user can download the
suitable BIOS. The address is as follows:
http:\\www.acrosser.com