Acrosser AR-B9622 - Manual (Page 31)

AR-B9622 User¡ ¦s Guide
4-1
4. CRT/LCD FLAT PANEL DISPLAY
This section describes the configuration and installation procedure when using the LCD and CRT displays.
l LCD Flat Panel Displays
l Supported LCD Panels
l CRT & LCD Displays
4.1 LCD FLAT PANEL DISPLAYS
Using the Flash Memory Writer utility to download the new BIOS file into the ROM chip to configure the BIOS
default settings for different types of LCD panels. And then, set your system properly and configure the AR-B9622
VGA module for the right type of LCD panel you are using.
The samples of LCD models listed on the table are just some of the LCD panel models available in the market that
the Chips & Technologies used by AR-B9622 VGA module can support. If you are using a different LCD panel
other than those listed, choose from the panel description column which type of LCD panel you are using.
The following shows the block diagram of using AR-B9622 for LCD display.
AR-B9622
CPU Boad
LCD
Panel
Inverter
Board
VBL Control
+12V, +5V
VEE
FL HIGH
Voltage
Figure 4-1 LCD Panel Block Diagram