Acrosser AES-HM76Z1FL - Manual (Page 64)

64
8.2.3. Watchdog
1. Syntax:
wdt_start(int value)
Description: This function of the watchdog time to start counter.
Parameters: The parameter ‘value’ is the value to set to watchdog timer register. The
range is 1~ 255 .
Return Value: None.
2. Syntax:
wdt_stop(Void)
Description: Any time call this function will stop Watchdog Timer.
Parameters: None.
Return Value: None.
3. Syntax:
get_wdt_count()
Description: This function read the value of the watchdog time counter.
Parameters: None.
Return Value: This function returns the value of the time counter.