Dodge JOURNEY 2010 - Manual (Page 441)

CAUTION!
• When installing the power module cover, it is
important to ensure the cover is properly posi-
tioned and fully latched. Failure to do so may
allow water to get into the TIPM, and possibly
result in an electrical system failure.
• When replacing a blown fuse, it is important to
use only a fuse having the correct amperage rating.
The use of a fuse with a rating other than indicated
may result in a dangerous electrical system over-
load. If a properly rated fuse continues to blow, it
indicates a problem in the circuit that must be
corrected.
Cavity
Cartridge
Fuse
Mini-
Fuse
Description
J1 40 Amp
Green
—
Power Folding Seat
J2 30 Amp
Pink
—
Transfer Case Module
– If Equipped
J3 30 Amp
Pink
—
Rear Door Module
J4 25 Amp
Natural
—
Driver Door Node
J5 25 Amp
Natural
—
Passenger Door Node
J6 40 Amp
Green
—
Anti-Lock Brake Sys-
tem (ABS) Pump/
Electronic Stability
Program (ESP)
440 MAINTAINING YOUR VEHICLE