Denon AVR-486 User Manual

Page 25

ENGLISH

Basic Operation

ENGLISH

• When making parameter settings, the display will return to the

regular condition several seconds after the last button was
pressed and the setting will be completed.

• DIMENSION setting

D I M E N S I O N 3

• CENTER WIDTH setting

C E N T E R W I D T H 3

• D. COMP. setting

D . C O M P . O F F

OFF

LOW

MID

HIGH

D E F A U L T Y / N

YES

Y/N

This parameter is displayed during DOLBY DIGITAL playback.

• DEFAULT setting

Select “YES” to reset to the factory defaults.

Press the

ENTER

button to finish the surround

parameter mode.

Surround parameters q

Pro Logic

x and Pro Logic

Mode:

The Cinema mode is for use with stereo television shows and
all programs encoded in Dolby Surround.
The Music mode is recommended for stereo music and
surround-encoded stereo music sources.
The Pro Logic mode offers the same robust surround
processing as original Pro Logic in case the source content is
not of optimum quality.
The Game mode is for playing games. The game mode can only
be used with 2-channel audio sources.
Select one of the modes (“Cinema”, “Music”, “Pro Logic” or
“Game”).
• Panorama Control:

This mode extends the front stereo image to include the
surround speakers for an exciting “wraparound” effect with
side wall imaging.
Select “OFF” or “ON”.

• Dimension Control:

This control gradually adjusts the soundfield either towards
the front or towards the rear.
The control can be set in 7 steps from 0 to 6.

• Center Width Control:

This control adjusts the center image so it may be heard only
from the center speaker; only from the left/right speakers as
a phantom image; or from all three front speakers to varying
degrees.
The control can be set in 8 steps from 0 to 7.

• SURROUND BACK SPEAKER setting

S B : O N

OFF

• TONE DEFEAT setting

T O N E D E F . O N

OFF

• PANORAMA setting

P A N O R A M A O F F

OFF