Denon AVR-486 - Manual (Page 10)

Easy Operation Easy Operation
ENGLISH
ENGLISH
7
4 Press the ON/STANDBY switch on the main unit
or ON/SOURCE button on the remote control
unit.
• Turn on the power.
5 Press the SPEAKER A button to turn the speakers
on.
3 Press the POWER switch.
£ OFF:
The power turns off and the indicator is off.
In this position, the power cannot be turned on and off from
the remote control unit.
¢ ON:
The power turns on and the indicator lights.
Set the POWER switch to this position to turn the power on
and off from the included remote control unit.
1 Turn on your subwoofer.
Turn on your monitor (TV).
Turning on the power
6 Set the MODE 1 switch to “AUDIO” (only when
operating with the remote control unit).
2
MODE 1
INPUT
SELECTOR
ON/SOURCE
SURROUND
MODE
SPEAKER
VOLUME
ON/STANDBY SURROUND MODE
POWER SELECT
INPUT SELECTOR
MASTER VOLUME SPEAKER A
Playing the input source
1 Select the input source to be played.
Example: DVD
(Main unit) (Remote control unit)
4 Adjust the volume.
(Main unit) (Remote control unit)
The volume level is
displayed on the
master volume level
display.
3 Start playback on the selected component.
2 Select the play (surround) mode.
Example: STANDARD
(Main unit) (Remote control unit)
SELECT
To select the surround mode while adjusting the surround
parameters, tone defeat or tone control, press the SURROUND
MODE button and then operate the selector.