English – Denon AVR-486 User Manual
Page 20
ENGLISH
17
System Setup
System Setup
ENGLISH
Page
Default settings
System Setup
System setup items and default values (set upon shipment from the factory)
1
Speaker
Configuration
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE
for full-size, full-range) to automatically set the composition
of the signals output from the speakers and the frequency
response.
Front Sp.
Large
Center Sp.
Surround Sp.
Subwoofer
Small
Small
Yes
Surround Back
Sp.
Small / 2sp
Subwoofer
Mode
This selects the subwoofer speaker for playing deep bass
signals.
3
Subwoofer mode = Normal
12, 13
2
Delay Time
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and
subwoofer according to the listening position.
14
Front
L & R
Center
Surround
L & R
Subwoofer
12 ft
12 ft
10 ft
12 ft
Surround Back
L & R
10 ft
13, 14
16
Digital In
Assignment
This assigns the digital input terminals for the
different input sources.
Input
source
Digital
Inputs
CD
AUX
DVD / VDP
COAXIAL1
COAXIAL2
OPTICAL
6
Crossover
Frequency
Sets the frequency (Hz) below which the bass sound of
the various speakers is to be output from the subwoofer.
4
80 Hz
14
5
Test Tone
This adjusts the volume of the signals output from the
speakers and subwoofer for the different channels in order
to obtain optimum effects.
Front
L & R
Center
Surround
L & R
Subwoofer
0 dB
0 dB
0 dB
0 dB
Surround Back
L & R
0 dB
15
Power Amp
Assignment
Sets this to switch the surround back channel’s power
amplifier for ZONE2 use.
Surround Back
16
9
7
Auto
Surround
Mode
Auto surround mode function setting.
Auto Surround Mode = ON
16
Ext. In SW
Level
Sets the Ext. In Subwoofer channel playback level.
Ext. In SW Level = +15 dB
16
8